Data collection and transmission device Taiga Node-LW
It is used for collecting and transmitting readings from various types of metering devices
Description
Taiga Node is device for collecting and transmitting data via LoRaWAN wireless data transmission technology with RS-485 interfaces (Modbus protocol support), 4-20 mA, analog input, digital input (guard or pulse counter), I2C and open collector.
It is used to collect and transmit readings from various kinds of metering devices, sensors (temperature, pressure, smoke, alarm status, etc.), industrial equipment.
The device will collect and transmit data via the LoRaWAN network to an analytical cloud platform.
Optionally can be supplied with GSM/3G/4G antenna ATM-GSM-900/1800-M4
It is used to collect and transmit readings from various kinds of metering devices, sensors (temperature, pressure, smoke, alarm status, etc.), industrial equipment.
The device will collect and transmit data via the LoRaWAN network to an analytical cloud platform.
Optionally can be supplied with GSM/3G/4G antenna ATM-GSM-900/1800-M4
Documentation
Declaration
Principle of operation
Wired sensors are connected to the device, the received data is transmitted wirelessly via LoRaWAN data transmission technology to the base station, followed by data transfer to the cloud storage.
Taiga Node-LW has a connector for connecting a LoRaWAN remote antenna, you can also use the built-in antenna on a separate printed circuit board.
Taiga Node-LW has a connector for connecting a LoRaWAN remote antenna, you can also use the built-in antenna on a separate printed circuit board.
Jumper for device
operation
operation
The device will NOT work without installing a jumper.
Included with the device is a jumper, which is installed on a pin connector for the required operating mode. The pin connector is responsible for the power configuration of the device and has two configurations:
EXT_PWR and BATTERY.
It is possible to install a non-removable jumper during production.
EXT_PWR and BATTERY.
It is possible to install a non-removable jumper during production.
EXT_PWR configuration
In this configuration, the device will work ONLY from external power supply: solar panel, power supply or 220V.
BATTERY configuration
In this configuration, the device uses backup batteries and a battery pack. First of all, the device will run on battery power. In case of low battery charge, the device automatically starts working from backup batteries.
Support for third-party sensor polling
The sensors "TKA-PCL" (26) and "TKA-PFL" (34) transmit their readings via a radio channel using LoRa modulation. TaigaNode-LW, after receiving this data and checking the checksums, sends the data unchanged via the LoRaWAN network to the server.
Functionality
Taiga Node-LW data collection and transmission device is a ready-made solution for your business
Data transmission over the LoRaWAN 1.0.3 network
It can be equipped with an additional expansion board
Non-volatile data storage up to 2MB
Data collection and transmission from various metering devices
Enclosure protection degree IP-67
Configuring the device and updating the software via Bluetooth from a smartphone
Collecting information
Wired sensors are connected to the device, and the received data is transmitted wirelessly via LoRaWAN data transfer technology to the base station, followed by data transfer to the cloud storage.
The TaigaNode-LW has a connector for connecting a LoRaWAN remote antenna, and you can also use the built-in antenna on a separate PCB.
Power
The device has a combined power supply of 220V, 12-24V (including from a solar battery), and the TaigaNode-LW has a backup power supply due to two replaceable lithium batteries.
Shockproof housing
The case has a degree of protection IP-67, its design allows you to use the device in extreme climate conditions.
The device is easily mounted on walls and brackets with the help of fasteners. The mounting holes are hidden by blind covers on the sides of the device.
Applications
Housing and utilities
The solution is suitable for residential buildings, apartments or neighborhoods. Installing the Taiga Node on apartment-by-apartment metering devices will allow you to automatically receive readings without the participation of residents.
Accounting for energy resources
The device for collecting and transmitting data can be attributed to an element of the pipeline telemechanics system. The device solves the issues of transmitting information about pressure, flow rate, temperature and other parameters.
Environmental monitoring
Additional control of parameters (temperature, magnetic influence, humidity, etc.)
More products
Write to us and we will discuss your project
© 2021 Taiga IoT
Website Development: Tilda
+7 (383) 382-81-81
info@taigaiot.com
Russia, Novosibirsk city
Mn-Fr: 9:00-18:00
Sat-Sun: Closer
info@taigaiot.com
Russia, Novosibirsk city
Mn-Fr: 9:00-18:00
Sat-Sun: Closer
Leave your contact details
We will contact you and answer all your questions