LIGHT CONROLLER

The outdoor light controller is designed to control the driver via the DALI protocol and with configuration via the LoRaWAN radio channel.

Supports dimming function to adjust the brightness of incandescent lamps.

The light controller has a built-in GNSS receiver for automatic time correction and automatic control of the light based on the installation location.

The device has a built-in supercapacitor for autonomous operation, in case the external power supply is cut off. Operating time from a backup power source up to 24 hours.

Дизайн без названия - 2020-08-31T195630.976

CHARACTERISTIC

PARAMETERDESCRIPTION
POWER
Operational voltage range12-24 B
Current consumption in active modeno more than 60 mA
Standby current consumption50 μA
Backup power supplybuilt-in supercapacitor
Back-up power supply timeup to 24 hours
INTERFACES
Interface supportDALI 1/2
Connectoraccording to zhaga book 18
Dimming level controlbased on the coordinates of the installation site with automatic determination of the time of sunset and sunrise
Dimming controlbased on real time
based on light level
SENSORS
Built-in GNSS receiverfor automatic time correction and automatic control of the luminaire based on the installation location
GNSS GPS / GLONASS supportyes
Number of channels 99 acquisition/ 33 tracking
Sensitivity-165dBm - tracking, -148dBm - acquisition
Built-in accelerometeryes, for automatic detection of the vertical angle of the lamp post
Automatic shock detectionyes
Built-in lamp temperature sensoryes
Built-in light sensoryes
LORAWAN RADIO COMMUNICATIONS
Communication standardLoRaWAN 1.0.3
LoRaWAN antennabuilt-in
LoRaWAN device classC (in sleep mode A)
Supported LoRaWAN regionsAS923, AU915, CN779, EU868, KR920, IN865, US915, RU864
Adaptive data rate (ADR)yes
Multicast supportyes
Remote multicast supportyes
Supports automatic time synchronizationyes
Public / private network supportyes
CONFIGURATION
By commands through the LoRaWAN network
Via a radio channel using a special USB dongle and windows application

DIMMING PROFILE TYPES

Dimming profiles, depending on the settings, can work based on:

Geographic coordinates of the installation site, according to the schedule, indicating the time offset from sunset and sunrise.

Absolute time, indicating the time of switching the dimming levels (static).

Light sensor based.

Profiles can be global (used for all devices on the DALI network) or personal (used for specific devices on the DALI network). In the absence of a personal profile, dimming should be done according to the active global profile.

There can be several global profiles in the device memory, but only one of them can be active (used at the moment).

The personal profile can only be a single copy for one device in the DALI network, it is also active.

LIGHTING CONTROL VIA DALI PROTOCOL

This protocol is used to control individual fixtures or lighting groups. DALI protocol can control a line to which up to 64 devices are connected. Each device can be assigned to 16 separate groups and 16 individual scenes.

Communication not only enables switching and dimming, but also the transmission of status messages from the implement to the controller.

DALI maximizes the flexibility of the system through easy control of lighting (using software without hardware modifications) and adaptation to new conditions (for example, when the purpose of use is changed).

DATA TRANSFER

LoRaWAN is a type of wireless communication that includes gateways that transmit data to a server. This data transfer option is the fastest and safest. LoRaWAN base station sends data to cloud storage. Further, the received data is sent to the server, after which it is sent to mobile user applications.

You can purchase the light controller from our partners “AirBit”

go to website AIRBIT

Monday-Friday: 9:00 – 18:00

630058, Russian Federation, Novosibirsk city, 40 Russkaya str

LIGHT CONROLLER

The outdoor light controller is designed to control the driver via the DALI protocol and with configuration via the LoRaWAN radio channel.

Supports dimming function to adjust the brightness of incandescent lamps.

The light controller has a built-in GNSS receiver for automatic time correction and automatic control of the light based on the installation location.

The device has a built-in supercapacitor for autonomous operation, in case the external power supply is cut off. Operating time from a backup power source up to 24 hours.

Дизайн без названия - 2020-08-31T195630.976

CHARACTERISTIC

PARAMETERDESCRIPTION
POWER
Operational voltage range12-24 B
Current consumption in active modeno more than 60 mA
Standby current consumption50 μA
Backup power supplybuilt-in supercapacitor
Back-up power supply timeup to 24 hours
INTERFACES
Interface supportDALI 1/2
Connectoraccording to zhaga book 18
Dimming level controlbased on the coordinates of the installation site with automatic determination of the time of sunset and sunrise
Dimming controlbased on real time
based on light level
SENSORS
Built-in GNSS receiverfor automatic time correction and automatic control of the luminaire based on the installation location
GNSS GPS / GLONASS supportyes
Number of channels 99 acquisition/ 33 tracking
Sensitivity-165dBm - tracking, -148dBm - acquisition
Built-in accelerometeryes, for automatic detection of the vertical angle of the lamp post
Automatic shock detectionyes
Built-in lamp temperature sensoryes
Built-in light sensoryes
LORAWAN RADIO COMMUNICATIONS
Communication standardLoRaWAN 1.0.3
LoRaWAN antennabuilt-in
LoRaWAN device classC (in sleep mode A)
Supported LoRaWAN regionsAS923, AU915, CN779, EU868, KR920, IN865, US915, RU864
Adaptive data rate (ADR)yes
Multicast supportyes
Remote multicast supportyes
Supports automatic time synchronizationyes
Public / private network supportyes
CONFIGURATION
By commands through the LoRaWAN network
Via a radio channel using a special USB dongle and windows application

DIMMING PROFILE TYPES

Dimming profiles, depending on the settings, can work based on:

Geographic coordinates of the installation site, according to the schedule, indicating the time offset from sunset and sunrise.

Absolute time, indicating the time of switching the dimming levels (static).

Light sensor based.

Profiles can be global (used for all devices on the DALI network) or personal (used for specific devices on the DALI network). In the absence of a personal profile, dimming should be done according to the active global profile.

There can be several global profiles in the device memory, but only one of them can be active (used at the moment).

The personal profile can only be a single copy for one device in the DALI network, it is also active.

LIGHTING CONTROL VIA DALI PROTOCOL

This protocol is used to control individual fixtures or lighting groups. DALI protocol can control a line to which up to 64 devices are connected. Each device can be assigned to 16 separate groups and 16 individual scenes.

Communication not only enables switching and dimming, but also the transmission of status messages from the implement to the controller.

DALI maximizes the flexibility of the system through easy control of lighting (using software without hardware modifications) and adaptation to new conditions (for example, when the purpose of use is changed).

DATA TRANSFER

LoRaWAN is a type of wireless communication that includes gateways that transmit data to a server. This data transfer option is the fastest and safest. LoRaWAN base station sends data to cloud storage. Further, the received data is sent to the server, after which it is sent to mobile user applications.

You can purchase the light controller from our partners “AirBit”

go to website AIRBIT

Monday-Friday: 9:00 – 18:00

630058, Russian Federation, Novosibirsk city, 40 Russkaya str

Open chat
Hello, how can I help you?