The outdoor light controller is designed to control the driver via the DALI protocol and with configuration via the LoRaWAN radio channel. Supports dimming function to adjust the brightness of incandescent lamps. The light controller has a built-in GNSS receiver for automatic time correction and automatic control of the light based on the installation location. The device has a built-in supercapacitor for autonomous operation, in case the external power supply is cut off. Operating time from a backup power source up to 24 hours.
*You can purchase the light controller from our partners "AirBit".
FEATURES
Data transmission LoRaWAN 1.0.3
Automatic detection of the vertical angle of the lamp post
Automatic shock detection
Built-in light sensor
Store up to 250 profiles
Configuration over the LoRaWAN radio channel and using the configuration device
Automatic time correction and automatic control of the luminaire based on the installation location
<b>Battery</b>
Operational voltage range;12-24 V
Current consumption in active mode;No more than 60 mA
Standby current consumption;50 μA
Backup power supply;Built-in supercapacitor
Back-up power supply time;Up to 24 hours
<b>Interfaces</b>
Interface support;DALI 1/2
Connector;According to zhaga book 18
Dimming level control;Based on the coordinates of the installation site with automatic determination of the time of sunset and sunrise
Dimming control;Based on real time, based on light level
<b>Data transmission</b>
Communication standard;LoRaWAN 1.0.3
LoRaWAN device class;C (in sleep mode A)
LoRaWAN antenna;Built-in
Supported LoRaWAN regions;AS923, AU915, CN779, EU868, KR920, IN865, US915, RU864
Adaptive data rate (ADR);Yes
Multicast support;Yes
Remote multicast support;Yes
Supports automatic time synchronization;Yes
Public/private network support;Yes
<b>Sensors</b>
Built-in GNSS receiver;For automatic time correction and automatic control of the luminaire based on the installation location
Support;GNSS GPS/GLONASS
Number of channels;99 acquisition/ 33 tracking
Sensitivity GNSS;-165dBm @Tracking, -148dBm @Acquisition
Built-in accelerometer;Yes, for automatic detection of the vertical angle of the lamp post
Built-in lamp temperature sensor;Yes
Built-in light sensor;Yes
<b>Configuration</b>
Configuration interface;By commands through the LoRaWAN network via a radio channel using a special USB dongle and windows application
Device configuration
Taiga IoT mobile application allows you to configure the device and set the necessary operating parameters. The application is supported on devices with the Android 8.0 and later operating system. After installing the Taiga IoT application, you get access to the device and can configure and use data from the smartphone screen.