Tracker LoRaWAN is designed to track the location and track the condition of cast iron trucks, containers and trailers from the start to the end point of movement. In addition to determining the location of the container, TrackerLoRaWAN allows you to count the activity of movements, detect strikes, coups, collisions. The device is made in a shock-resistant sealed case that ensures operation even in the most severe conditions.
FEATURES
Data transmission LoRaWAN 1.0.3
Determining the location in an open area using GPS/GLONASS
Location detection using the iBeacon scanner
Detection of impacts, overturns and collisions in case of an emergency
Calculation of the motion activity of the controlled object
Up to 3 years of battery life
Configuring the device and updating the software via Bluetooth from a phone
Parameter;Characteristic
<b>Enclosure and dimensions</b>
Material;Polycarbonate
Dimensions;145x90x55mm
Ingress protection rating;IP-68
<b>Operational conditions </b>
Operational voltage;-40…+85 °С (when using batteries that meet climatic requirements and operating conditions)
Humidity;0-100%
<b>Battery</b>
Напряжение питания;3.7 V
Battery model;LiSoCl2
Battery lifetime; Up to 3 years depending on settings
Capacity;20000/40000 mAh
<b>Data transmission</b>
Communication standard;LoRaWAN 1.0.3 class A
Supported regional plans;RU864/EU868
Radio frequency range;864-870 MHz
Maximum transmit power;16 dBm
Sensitivity;-129 dBm
Activation method in the network;OTAA
<b>GNSS geolocation</b>
Antenna type;Built-in ceramic
Supported GNSS navigation satellite systems;GLONASS/GPS
Number of channels;72
Sensitivity;-167 dBm
Cold start time;40 s
Hot start time;2 s
Automatic synchronization of the real-time clock by GNSS signals;Yes
<b>Bluetooth geolocation</b>
Geolocation method;Bluetooth low energy
Scan period/time;Configurable
Bluetooth beacon format;iBeacon
Filtering Bluetooth beacons;Yes
Switching to sleep mode when there is no movement;Yes, with configurable inactivity time
<b>Configuration</b>
Configuration interface;Using the Android mobile app via Bluetooth
<b>Identification</b>
Identification method;Built-in NFC tag with device information and LoRaWAN activation keys
Device configuration
Taiga IoT mobile application allows you to configure the device and set the necessary operating parameters. The application is supported on devices with the Android 8.0 and later operating system. After installing the Taiga IoT application, you get access to the device and can configure and use data from the smartphone screen.